Product Qualification Testing

Specialized Testing is committed to providing product qualification and certification testing services to our clients throughout the US, in conformance with applicable standards and procedures in an ethical, timely, confidential, and cost-effective manner.

ISO ISE 17025 Certified Screw Spike Fastener Nail Laboratory

Our services include screw testing according to the following standards:


Self Drilling, Self Tapping, and Self Piercing Screws

  • AISI CF92-1
  • ICC-ES AC118
  • AISI TS-4-02
  • AISI TS-5-02
  • ANSI/ASME B18.6.4
  • SAE J78
  • SAE J81
  • SAE J933
  • ASME/ANSI B18.18.1 M-1987

Drywall Screws

  • ASTM C 1002
  • ASTM C 954

Wood Screws

  • ICC-ES AC120
  • ASTM D 1761
Read More

We offer static: tension, shear, and oblique, proper functioning tests, and certain suitability tests according to the following standards:


  • ASTM E 488
  • ASTM E 1512
  • ICC-ES AC01
  • ICC-ES AC58
  • ICC-ES AC60
  • ICC-ES AC70
  • ICC-ES AC106
Read More
Specialized Testing provides racking and static tests of wall, floor, and roof assemblies according to the following standards:

  • ASTM E 72
  • ASTM E 564
  • ICC ES AC130
  • ICC-ES AC154
  • ICC-ES AC230
  • ICC-ES AC269
Read More

We provide testing for roof tiles and precast stone veneer according to the following standards:


  • ASTM C 67
  • ASTM C 1167
  • ASTM C 1492
  • ICC-ES AC180
  • UBC 15-5
  • SBCCI, SSTD 11-99
  • PA 102-94 (State of Florida Building Code and Metro-Dade Building Code Compliance)
  • TAS 101-95
  • TAS 102-95
  • TAS 112-95
  • ICC-ES AC51
Read More
Specialized Testing provides physical property tests according to the following standard:

ASTM D790 measures the flexural properties of a material while under a bending strain or deflection. This test is conducted on a universal testing system using a three-point bend fixture at a rate proportional to the depth of the specimen. ASTM D790 testing is used to determine the following mechanical properties:

  • Tangent modulus –
  • Secant modulus –
  • Chord modulus –
  • Flexural strength –
  • Flexural Stress at Break –
Read More

ASTM & ICC STANDARD testing and qualification

PRODUCT QUALIFICATION TESTING

Specialized Testing physical property tests, static: tension, shear, and oblique, proper functioning tests, and certain suitability tests to name a few.

We test and qualify under 50 ASTM Standards for Mechanical and Chemical Anchors, Dynamic and Static Testing of Panel Systems, Roof Tiles and Precast Stone Veneer, Special Roofing Systems, Screws, Powder Actuated Fasteners and more…

Product Qualification Testing
0

Product
Qualification
Projects

1 K

Satisfied Customers

ASTM/ICC panel systems testing and certification

PANEL SYSTEMS QUALIFICATION TESTING

Specialized Testing provides racking and static tests of wall, floor, and roof assemblies according to the following standards:

Concrete Testing Icon
0

Panel System
Testing
Projects

1 K

Satisfied Customers

tensile, yield, and elongation tests

POST TENSION CABLE & REINFORCEMENT STEEL TESTING

We offer quantitative testing of post tension cable and reinforcement steel using our high-reliability laboratory testing procedures and equipment. When you test your post tension cables and reinforcement steel with Specialized Testing you will receive timely, accurate and reliable results. 

Post Tension Cable Testing
0

Post Tension Cable / Reinforcement Steel Testing Projects

1 K

Satisfied Customers

all product qualification and certification testing services

We offer screw testing according to the following standards:

Self Drilling, Self Tapping, and Self Piercing Screws
  • AISI CF92-1
  • ICC-ES AC118
  • AISI TS-4-02
  • AISI TS-5-02
  • ANSI/ASME B18.6.4
  • SAE J78
  • SAE J81
  • SAE J933
  • ASME/ANSI B18.18.1 M-1987
Drywall Screws
  • ASTM C 1002
  • ASTM C 954
Wood Screws
  • ICC-ES AC120
  • ASTM D 1761
Read More
We offer static: tension, shear, and oblique, proper functioning tests, and certain suitability tests according to the following standards:

  • ASTM E 488
  • ASTM E 1512
  • ICC-ES AC01
  • ICC-ES AC58
  • ICC-ES AC60
  • ICC-ES AC70
  • ICC-ES AC106
Read More

Specialized Testing provides racking and static tests of wall, floor, and roof assemblies according to the following standards:

  • ASTM E 72
  • ASTM E 564
  • ICC ES AC130
  • ICC-ES AC154
  • ICC-ES AC230
  • ICC-ES AC269
Read More

We provide testing for roof tiles  according to the following standards:

  • ASTM C 67
  • ASTM C 1167
  • ASTM C 1492
  • ICC-ES AC180
  • UBC 15-5
  • SBCCI, SSTD 11-99
  • PA 102-94 (State of Florida Building Code and Metro-Dade Building Code Compliance)
  • TAS 101-95
  • TAS 102-95
  • TAS 112-95
  • ICC-ES AC51
Read More
We provide testing precast stone veneer according to the following standards:

  • ASTM C 67
  • ASTM C 1167
  • ASTM C 1492
  • ICC-ES AC180
  • UBC 15-5
  • SBCCI, SSTD 11-99
  • PA 102-94 (State of Florida Building Code and Metro-Dade Building Code Compliance)
  • TAS 101-95
  • TAS 102-95
  • TAS 112-95
  • ICC-ES AC51
Read More

Specialized Testing provides plastic tiles and panels, cement-based panels, and composite tiles, cementitious faced panels tests according to the following standard:

  • ICC-ES AC07
Read More
We offer static: tension, shear, and oblique, proper functioning tests, and certain suitability tests according to the following standards:

  • ASTM E 488
  • ASTM E 1512
  • ICC-ES AC01
  • ICC-ES AC58
  • ICC-ES AC60
  • ICC-ES AC70
  • ICC-ES AC106
Read More

Specialized Testing provides physical properties and connection tests according to the following standards:

  • ASTM F 1575
  • ASTM F 1667
  • ICC-ES AC116
  • ICC-ES AC201
Read More

Specialized Testing provides tension, shear, and oblique tests in: concrete, CMU, steel, and composite decking according to the following standards:

  • ASTM E 1190
  • ICC-ES AC70

This test determines the static axial tensile and shear strengths of power-actuated fasteners installed in structural members made of concrete, concrete masonry, and steel.  These test methods are intended for use with fasteners that are installed perpendicular to a plane surface of the structural member.

Read More
Specialized Testing provides physical property tests according to the following standard:

ASTM D790 measures the flexural properties of a material while under a bending strain or deflection. This test is conducted on a universal testing system using a three-point bend fixture at a rate proportional to the depth of the specimen. ASTM D790 testing is used to determine the following mechanical properties:

  • Tangent modulus –
  • Secant modulus –
  • Chord modulus –
  • Flexural strength –
  • Flexural Stress at Break –
Read More

Our Certifications and accreditations

Why choose Specialized Testing for your Product Qualification Testing?
We have the experience, Qualification and Expertise to handle your Next Project
ISO ISE 17025 Certified Laboratory
la dbs icon concrete testing icon
California certified disadvantaged business enterprise
Division of the State Architect Certified Concrete Testing Lab Icon
California Division of General Services Architect Certified Concrete Testing Icon
IAS Accredited Materials Testing Laboratory Icon
Miami Dade County Certified Material Testing Lab
Florida Department of Community Affairs Certified Testing Laboratory Icon
ccrl cement and concrete reference lab

Ready to Get Started?
Contact Us Today.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

About specialized testing

Your source for Material Testing, Concrete testing, Concrete Scanning, Field Testing, & Product Qualification testing.

For over 30 years Specialized Testing has been providing nation-wide product certification testing and throughout California and the Southwest, Concrete Testing and Scanning Services. Our primary mission is to ensure the safety of and integrity of job sites and products throughout the US. For over 3 decades we have served thousands of customers and offered reliable services and the highest quality results.

Specialized Testing is a full-service lab specializing in the testing of rebar, concrete and masonry materials. We provide services to engineers, inspectors, and construction professionals. Located in the City of Santa Fe Springs we are an approved testing facility by the ACI (American Concrete Institute) and the City of Los Angeles. Serving Los Angeles County, Orange County, San Bernardino, and Riverside County we are committed to providing our services in a timely and professional manner. We pick up all sample specimens within 48-hours of notification and aim to provide lab results within three days of initial test.
Show